Comments on: How can I find a leak in a double air bed – too big to immerse in water?

By: dderat

dderat — Tue, 16 Mar 2010 09:32:59 +0000

spray Windex or equivalent on it. You will find the leak in short order.
References :

By: Wendy M

Wendy M — Tue, 16 Mar 2010 09:15:59 +0000

Prepare yourself…
You locate the general area of the leak by the noise…then you spit.
Soapy water works too but not as good as old fashioned spit. It will bubble pretty easily and give it away.
References :

By: joe citizen

joe citizen — Tue, 16 Mar 2010 08:40:59 +0000

blow in it with smoke then smoke will come out the hole
References :

By: carla

carla — Tue, 16 Mar 2010 08:35:59 +0000

.
References :

By: houckg1965

houckg1965 — Tue, 16 Mar 2010 08:03:59 +0000

pour water on it in sections til you find leak.
References :

By: GREG H

GREG H — Tue, 16 Mar 2010 07:37:59 +0000

MIX DISHSOAP AND WATER IN A SPRAY BOTTLE AND SPRAY THE BED, LET STAND FOR A COUPLE MINUTES. WE USED "DAWN" AT THE GOODYEAR STORE FOR THE 6 YEARS I WORKED THERE TO FIND LEAKS IN TIRES.
References :

By: mantywoc

mantywoc — Tue, 16 Mar 2010 07:00:59 +0000

Take a damp rag and run it over the surface and which for bubbles.
References :

By: Surveyor

Surveyor — Tue, 16 Mar 2010 06:50:59 +0000

Use a paintbrush with soapy water. Start with the valve where you fill it, then work your way down all the seams. Then ove the entire surface. If there is a leak, it will show up as bubbles.
References :

By: dragon

dragon — Tue, 16 Mar 2010 06:22:59 +0000

simple! get a bucket, warm water and dish washing soap… rub the matt with a sponge soaked with bubbles… where ever the hole is, you will see the bubbles going crazy
References :
my dad

By: Shérry

Shérry — Tue, 16 Mar 2010 06:03:59 +0000

use tissue, cover one side with a light tissue, if it is 2 ply you might want to seperate the plys and apply pressure to one side and try to force the leak out. repeat with different sections of the bed until you find the leak.
References :